Product Information and Details
The AGATEC 11-0100 LT300 Interior Split Beam Horizontal and Vertical All Metal Housing Rotary Laser Level with Dual Manual Grade is one of the toughest, fully waterproof interior laser levels on the market. The durable all metal housing of the AGATEC LT300 was designed to provide the interior contractor with the most rugged and reliable laser for use on the roughest of job sites. The AGATEC LT300's rotary laser head is fully contained in a sealed, nitrogen-filled glass housing that allows for optimal 360 degree coverage without blind spots. The AGATEC LT300 is fully self leveling and does not require the use of level screws or level vials to set it up. Just mount the laser on the tripod and press the power button. The laser will level itself within its wide leveling range (+/- 8%) then spin. Should the unit move out of its initial position, the H.I. (height of instrument) alert will shut the laser down eliminating bad elevation measurements on the job site. The AGATEC LT300 has an accuracy of 1/8" @ 100ft with a working range of up to 1000ft in diameter with the optional RCR500 laser detector and up to 200ft visibly depending on lighting conditions. The user can also match slope with the AGATEC LT300 using the laser's manual mode to override self leveling, or in one axis with the security of cross axis leveling. Dual manual grades of up to 8% in X and Y are standard with the AGATEC LT300. The AGATEC LT300 features six rotation speeds, 0, 90, 150, 300, 450, 600RPM allowing the user to make the beam more visible in varying light conditions. The AGATEC LT300 may also be operated in the vertical mode where it is also self leveling. Just roughly level the laser with the trivet feet mounted on the side of the laser and the motors take over and level the instrument. The AGATEC LT300 features a split beam laser that will allow the user to complete alignment and squaring tasks on the job site. The user may also use the 2 degree to 35 degree scanning mode to work in specific areas so as not to create bounce back in interior job sites with highly reflective surfaces. The rechargeable battery of the AGATEC LT300 provides up to 40 hours of operation between charges. The AGATEC LT300 comes complete with the laser, TL25 remote control, integrated battery, battery charger, wall mount, target card, laser glasses, carrying case and user's manual. 12 month warranty.
Features
1/8"@100ft Accuracy provides optimal jobsite working range
1000ft diameter working range provides optimal jobsite coverage
H.I. Alert informs user that the laser has moved from its initial position or when it has been disturbed