Product Information and Details
The AGATEC 11-0340 A710 Split Beam Electronic Dual Grade Self Leveling Rotary Laser Level and MR240 Machine Sensor Site Preparation Kit is the toughest and most versatile fully waterproof and dust proof laser level. The AGATEC A710 is the ultimate multi-tasking tool. Use it as a standard horizontal laser, as a grade laser, as an interior laser and as a alignment laser with digital grade for run sewer connections such as pipe leads up to 60ft-70ft in length. The AGATEC A710 is accurate to 1/8"@100ft with a horizontal working range of 1000ft in diameter with the included MR240 machine detector, (visible range is approximately 200ft depending on lighting conditions). The AGATEC A710 is fully self leveling and simple to get started. Just set up on the tripod and press the power button. The AGATEC A710 will level itself within its 6 degree self leveling range and start spinning. You may then enter grades up to +/-10% (increments of 0.001%) in the X and Y axis for grade applications using the detachable IR/Radio remote control. The AGATEC A710 has seven rotation speeds to choose, (0, 60, 150, 300, 450, 600, and 700RPM). The slower the speed the more visible the beam, the faster the speed them better for outdoor use with a rod or machine control, (600RPM+ optimal). In the self leveling vertical mode, users can utilize the AGATEC A710 for squaring, alignment or even as a limited pipe laser for short pipe runs such as leads up to 60 -70 feet. The AGATEC A710 can also have a vertical grade entered in the Z axis and includes a sighting target to be used with the AGATEC A710 in the vertical mode. The AGATEC A710 also has all the features needed for the interior job site like adjustable scanning mode and a constant square shot that adjustable left and right for alignment or squaring tasks. The included AGATEC MR240 machine sensor provides the user with a laser sensor that can be mounted on the dipper arm of back hoes or excavators via the rare earth mounting magnets. Grade indications are visible via the bright crisp LED lights indicating above, below and on grade signals. The AGATEC MR240 allows the machine operator to continue working as grade indications are directly visible to the operator from the cab of the machine. The AGATEC MR240 keeps co-workers out of the danger zones of heavy machines and allows them to be more productive on other areas of the job site. The AGATEC A710 is the perfect choice for the contractor who does site work, leveling, machine control, short run pipe laying, alignment, vertical work, and interiors. Why buy several pieces of equipment when one does them all. The AGATEC A710 Site Preparation Kit comes complete with the laser, integrated battery (40hours operation), charger, MR240 receiver, CM200 pipe target, carrying case and owner's manual. 12 month warranty.
Features
1/8"@100ft Accuracy provides optimal jobsite working range
1000ft diameter working range provides optimal jobsite coverage
H.I. Alert informs user that the laser has moved from its initial position or when it has been disturbed