Diazit Blueprint Machine Omnitrac EFP
Product ID:
ES1864 |
Share this Page
One print or one hundred, the Omnitrac EFP (Environmentally Friendly Plus) model makes either conveniently. Quality and quantity are obtainable without compromise at the lowest ammonia levels available in the industry.
Multiple sheet runs of 30"x42" (AO) prints are possible at ammonia levels of less than 3ppm. As with all DiAZiT models, prints are exposed safely on a glass cylinder rather than contacting the hot surface of the fluorescent lamp. The ammonia developer is corrosion-resistant for durability and a minimum of maintenance.
The Omnitrac EFP models operate at maximum printing speeds of 25 fpm (457 m/hr) and have a maximum print width of 48" (1200 mm). The powerful 250 V.A. VHO fluorescent lamp offers printing speeds equivalent to two and three lamp diazo copiers.
Specifications
Print Speed: 25 ft/min (457 m/hr)
Print Width: 48" (1200 mm)
Shipping Wgt: 310 lbs. (140 kg) w/console
Dimensions: 62"W x 47"H x 25"D (158 x 120 x 64cm)
Electrical: 1-250VA fluorescent, 120V / 60HZ 10 Amp (220V / 50HZ 5 Amp)
Displayed image shows the Omnitrac EFP with Optional Sheet Storage Cabinet (7081), and Sheet Stacking Stand (7036), and Feedboard (7016) which are all sold separately.
Ships by Truck (read more)
Please note: Blueline machines do not copy copies. Blueline machines require you start with a media that light can pass through, such as trans-bond or vellum. It makes blueprints from "originals" only. Further, if you want to make a "copy of a copy", then this machine is not for you. You want a large format copy machine.
- Usually ships off dock within: 1 to 2 Days
| Optional Sling Stand (7012): | |
| Optional Sheet Stacking Stand (7036): | |
| Optional Sheet Storage Cabinet (7081): | |
| Feedboard (7016): | |
Lift-Gate Truck
(Required if you do not have a loading dock): | |
| Inside Delivery: | |
|
|
|