Diazit Omni 120-E Blueprint Machine

Product ID: ES1382

Share this Page

The Omni 120-E model is the most-economical 250 V.A. single lamp blueprint machine available.

The Diazit Omni 120-E features include user-friendly solid-state dual-range speed control that can be switched from normal high speed to a low speed range for printing precision specialty intermediates, a forward/reverse switch, and a simple on/off operation without waiting for warm-up. However, the exclusive DiAZiT Ammonia Arrestor System is optional if required. The Omni 120-E can be used as a tabletop model incorporating a Feedboard or it can also be mounted on the Omni 120-E Stand as pictured with a Feedboard or Roll Box.

Specifications

Throat Size: 48"

48" Print Width

Speeds up to 25 feet/min

Shipping Wt: 120 lbs. (55 kg)

Dimensions: 158" x 28" x 31" (62W x 11H x 12D cm)

Electrical: 1-250 VA fluorescent lamp, 120 V / 60HZ 8 Amp (220V / 50HZ 4 Amp)

Required Equipment if used in TableTop Mode

Omni 120-E

Feedboard

Optional Equipment

Ammonia Arrestor

Rollbox (Replaces Feedboard)

Sling Stand

NOTES
The feedboard is required if the sling stand is used or not. The only time the feedboard is NOT used, is when the Rollbox replaces it. The Rollbox can be used in TableTop Mode.

1-year Manufacturers Warranty states: Defective parts due to craftsmanship are covered at no charge from Manufacturer. Labor is not included. Lamps are not included in warranty.

Please note: Blueline machines do not copy copies. Blueline machines require you start with a media that light can pass through, such as trans-bond or vellum. It makes blueprints from "originals" only. Further, if you want to make a "copy of a copy", then this machine is not for you. You want a large format copy machine.