Dunham & Morrow Magnetic Locator DML2000-M with Hard Case
Product ID:
ES293 |
Share this Page
The DML2000-M Magnetic Locator has all of the standard features of the DML2000, plus an easily readable Liquid Crystal Display (LCD) panel meter. The DML2000-M with its 3 1/2 digit (0 to ± 1999) Digital Panel Meter, gives the operator a real time, true visual representation of the instrument's output frequency changes, it also provides the highest resolution display of any Magnetic Locator. The digital display provides an exact numeric readout with a separate polarity indicator that can be even more useful to the experienced professional.
When the panel meter peaks and the polarity changes, this normally indicates that you are directly over the end of that pipe section, typically a weld or a "Bell" joint. A polarity change that occurs when the meter readings are at a minimum means you are over the midpoint of that pipe section.
| Target |
Depth |
| Iron Marker (3/4" x 18") |
Up to 9 feet |
| Cast-Iron Pipe (4" Pipe) |
Up to 10 feet |
| Manhole Cover |
Up to 10 feet |
| Well Casing |
Up to 18 feet |
| PK Nail (1.5") |
Up to 12 inches |
| Iron Valve |
Up to 10 feet |
| 55 Gallon drum |
Up to 10 feet |
| Septic Tank (Handles) |
Up to 5 feet |
Dimensions: 42.5" Long x 3.75" Wide x 1.75" Deep,
(108 cm L x 9.5 cm W x 4.4 cm D)
Waterproof Length: 36" (91.4 cm), base to tip of sensor tube
Weight: 1.8 lb. (0.8 Kg)
Operating Time: up to 40 hours
Power: Uses four AA alkaline batteries
Low Battery Indicator: Red, flashing LED
Temperature Range: -20°F to 120°F, (-29°C to 50°C)
Includes: Lifetime manufacturers warranty, hard plastic case, instruction manual, a carrying strap and an extra set of batteries.
- Usually ships off dock within: Same Day
|
|
|