Superior high frequency (480 kHz) performance. Pipehorn is the best tool in the industry when direct connect is not possible, and on the toughest conductors: coated iron pipes with insulated joints, un-energized power (street/parking lot lights), worn-out tracer tape & wire, short side services & stub-outs, concentric neutrals, and fiber. Nothing sweeps areas for un-marked utilities like a Pipehorn.
Simultaneous conductive transmission of both high (480 kHz) and low (9 kHz) frequencies for congested areas and for long distance locates (800-HL). Check either signal with the flick of a switch. Working depth of 4 to 18 feet depending on the type of connection, soil conditions and how well the item conducts the signal.
No more air broadcast on high frequency conduction. Better signals on the worst conductors.
Fast-response signal strength meter and sharp audio tone for precise pinpointing.
Watertight reinforced receiver wand. More durable than ever.
All-weather, high-impact ABS housing on transmitter. Audio tone indicates battery strength and good connection. Low profile (wont tip over). Bright yellow (easier to see).
Lightweight, space saving carry bag.
Transmitter
- Frequencies: 480 kHz and 9 kHz
- Modes: Inductive & Conductive
- Battery: 8 "C" alkaline batteries
- On/Off indicator
- Battery Life Indicator
- Good Signal Indicator
Receiver
- Output: Signal strength meter and audible, built in speaker
- Gain: Smart Control (semi-automatic)
- Battery: Two 9-volt
- Weight: 3.4 lbs. (1.5 kg)
Standard Accessories:
- Conductive Cables
- Extension Sweep Handle
- Ground Rod
- Padded Carrying Bag
- Total Shipping Weight: 18 lbs.
FULL three-year manufacturers warranty.
Documentation: