Schonstedt Model MAC-51Bx (Includes Case)


Product Code: ES159
Secure Shopping!
Low Prices!
Trusted Brands!

Share |

Product Information and Details


See Similar Products and Categories

The MAC-51Bx is the most cost-effective, all-purpose locating system on the market. It consists of a magnetic locator, similar to the most popular GA-52Cx model, and a null-over-target pipe and cable locator capable of locating on two frequencies: 571Hz and 82.5kHz.

In the LO and HI modes, the receivers audio signal provides a sharp null when its tip is directly over the target. In the MAG mode (no transmitter required) the audio signal peaks when the receiver's tip is over the target. You can trace the 571 Hz LF signal conductively applied to any continuous metal conductor up to 4000 feet.

The receiver's on-the-fly mode-changing feature lets you locate a complete break using the LO mode, and then continue on to trace beyond the break in the HI mode, or trace a metal pipe joined with non-conductive gaskets.

The MAC-51Bx by simultaneously transmitting 82.5 kHz (HF) and 571 Hz (LF) signals lets you select and compare received audio signals from both frequencies along with magnetic information without having to return to the transmitter.

Transmitter Inductive Mode (HF only)
Induction is achieved by placing the transmitter over the target cable/pipe or by using the optional Inductive Signal Clamp. It's the easiest and quickest way to applying a trace signal that is strong enough for tracing most lines. The trace signal generates an alternating magnetic field around the cable which induces a signal into the receiver's cable sensor. A sharp null in the audio signal between the two peaks occurs when the receiver's tip is directly over the cable.

Transmitter Conductive Mode
If an exposed section of a target gas or water pipe is accessible, conductive coupling is the most reliable method for applying the trace signal. This mode has to be used to apply both HF and LF frequencies so that you can use all three features on-the-fly. Providing a good electrical contact between the clip and the conductive portion of the target line by removing rust or paint before attaching the clip is very important.

Magnetic Locating Mode
Only the MAC-51Bx receiver is required when operating in the magnetic mode. Just set the Mode switch to MAG, the Gain control to mid-range, and you're ready to locate underground ferrous pipes, water meters, water valves, and property markers - or anything that has a magnetic field including the 50/60Hz electro-magnetic field generated by energized power lines.

Features:
  • Three Year Warranty
  • Two active frequencies for pipe, cable and line tracing
  • Passive operation for locating iron and steel targets and energized 50/60Hz power lines
  • Inductive and conductive signal coupling
  • Extra Heavy Duty Clips and Cable
  • Five discrete sensitivity settings
  • Receiver supplied with two environmentally friendly 9-volt lithium batteries
  • Piezoelectric Speaker
  • 45º Depth Measurement
  • Patented HeliFlux Sensors

    • Specifications:
    Receiver
  • Operating Voltage: 9V (2 alkaline or 2 lithium batteries)
  • Battery Life: 60hrs, alkaline (on & off usage @ 70ºF), 120 hrs, lithium (on & off usage @ 70ºF)
  • Audio Output: Approx. 40 Hz idling tone from speaker
  • Frequency of pulsing tone (increases or decreases) with signal intensity
  • Weight: 2.64 lb. (1.20 kg.)
  • Operating Temp: -13oF to 140oF (-25oC to 60oC)
  • Overall Length: 42.3 in. (107.4 cm.)
  • Waterproof Length: 34.5 in. (87.6 cm.)
  • Nominal Sensor Spacing: 20 in. (50.8 cm.)

    • Transmitter
  • Operating Voltage: 12V (8 alkaline C-Cell batteries)
  • Battery Life: 60 hours (on & off usage @ 70ºF)
  • RF Output: 82.5 kHz modulated at 382 Hz, pulsed at 4.4Hz
  • 571 Hz Pulsed at 4.4 Hz
  • Audio Indicator: 2.58 kHz pulsed at 4.4 Hz
  • Weight: Approx 5.5 lb. (2.5 kg.)
  • Operating Temp: -13oF to 140ºF (-25ºC to 60ºC)
  • Overall Size: 43.5 in. x 7 in. x 5 in.
  • (110.5 cm x 17.8 cm. x 12.7 cm.)


    • The MAC-51Bx comes standard with:
  • Custom Hard Case designed to withstand the rigors of field use (Case is Transmitter)
  • Receiver (wand)
  • Instruction Video
  • Users Manual
  • Conductive Cable and Clips Assembly (8 Ft long cable with two size clips: 1 large, 1 small)
  • Batteries

    • Optional equipment sold separately:
  • MOLE MT-2 Transmitter
  • Head Phones
  • Inductive Signal Clamp



    • Download or View the MAC-51Bx Instruction Manual (PDF)
    Condition: New
    • Usually ships off dock within:Same Day
    List Price $3,050.00
    Your Price $1,889.99
    You Save $1,160.01
    Qty
    Ask Us A Question

    More items to consider:

    MOLE MT-2 Transmitter (Optional for Schonstedt MAC-51Bx) ES241
    MOLE MT-2 Transmitter (Optional for Schonstedt MAC-51Bx)
    The MT-2 (Mole) is a miniature transmitter designed to be used in conjunction with the Schonstedt MAC-51Bx Receiver.
    $355.00

    Customer Reviews


    Write A Review