Volume discount when you buy 3 or more units.
The most portable Pipe & Cable Locator ever made. One-hand operation makes underground locating utilities a lot faster. If you're wanting to locate utilities underground like buried pipes and cables, the XTpc is a very useful tool to have.
- 1 9V alkaline battery for the receiver
- 1 rechargeable NiMH pack for the transmitter
- Main charging system for the transmitter
- Auto adapter for the transmitter
- Holster (PC10012)
- Conductive clip assembly
- Ground stake (208263)
- Soft carrying case (PC40000)
Extends for greater sensitivity, Retracts for easier carrying
Portable, Includes receiver holster and accessory pouch
One-hand receiver operation
Industry's smallest transmitter
Transmitter uses rechargeable batteries
Only complete locator system you can carry on your tool belt
Industry's smallest Transmitter, 7.2" L x 2.2" W x 1.5" H
One hand operation, reach all controls with your thumb
Direction arrows for easy locating and fool-proof centering
Digital signal strength readout, plus variable frequency audio
Single button depth calculation
Manual or Automatic gain control
Volume control, plus earphone jack
Battery indicator on both receiver and transmitter
Available in either 33kHz or 82kHz
50/60hz power line locating capability
Transmitter includes a current meter and adjustable power levels
Which Model Should you Choose?
XTpc-33 is used for locating Cable TV lines, and Tracer wires.
XTpc-82 is used for locating aluminum pipe, lead pipe, brass pipe, Cast iron pipes, and pipe buried under concrete.
Manufacturers 3-year warranty. If customer returns warranty card to Schonstedt, customer gets 6 months extension on warranty.
Note about Sondes and their use: If you're planning to use the XTpc with a Sonde, you'll need to purchase a Sonde separately. You will also need to let us know prior to ordering the XTpc locator that you plan to use it with a Sonde, so the factory can install the correct software on the locator before it is shipped. Please note that the Schonstedt XTpc can only do one Sonde at a time. If you have the factory configure your XTpc for 512kHz, you lose the 33kHz, or 82kHz whichever you had configured or had purchased. Further, you can consider using an inductive antenna which induces a signal through the ground onto a line when you cannot do a direct connect with conductive clips, nor a induction clamp.
The recommended Sondes for use with the XTpc are;
TM50910 (512 Standard Sonde)
TM50911 (512 Micro-mini Sonde)
TM-82kHz-T (82kHz Standard Sonde)
PC-33kHz-T (33 kHz Standard Sonde)