You might be trying to hang a set of pictures along a single wall, but you don’t want them to look lopsided. With a standard leveling system, you could have a problem. It’s impossible to hold your level against the wall while you’re hammering a set of nails. You would need an extra arm, and you don’t have one. So, you would need to have a second person to help you with the job. Laser levels make it easier to do these tasks. And in many cases, they don’t require a second person.
Frequently Asked Questions
What is a self-leveling laser level?
A laser leveling device will emit a beam that will give you a straight-line reference along any surface (such as a wall or floor). And because most laser levels can be mounted to a tripod or wall, your hands will be free to hammer nails or line up whatever needs to be straight. These tools will make DIY projects a lot simpler, but they can also be beneficial for the construction professional.
How do I use a 5-point laser level?
Laser levels send out a beam of light that can create a virtual chalk line whenever you need a straight and level reference point, and its size will depend on the size of the diode. For this type of application, a smaller beam is preferable because it’s more precise. With a wider beam, the actual level point can be anywhere inside the width of the beam.
Can I use a laser level on the floor?
You can use a surface laser leveling device by setting it at the benchmark high spot that you want throughout the floor. A single laser line means you have a consistent elevation that’s on your benchmark point. But if you see two lines, the floor is either lower or higher. From there, you’ll need to rotate the device few degrees and mark spots that are low or high until you make a complete circle. This is where a rotary self-leveling laser comes in handy.
How do I choose a laser level?
Not all laser levels are created equal, and there are many things you have to consider before you decide to buy one. Laser leveling devices can be a useful alignment tool if you find one that’s suitable for the kinds of tasks that you'll be performing. Dot lasers are the most basic types of laser levels, and they're typically used for simple tasks that are occasionally performed around the house. A rotary self-leveling laser is made for more complex construction projects that need more precise measurements.
How much is a laser level?
Laser levels are important tools that are needed to complete a variety of projects, which is why they’re so popular around the world. And there are many options from which you can choose. This can cause confusion while you’re looking for the right tool. Contrary to popular belief, there are many affordable laser levels. But you need to do your homework, so you can find the best deal possible.
Whether you’re looking for a rotary self-leveling laser or any other laser leveling device, be sure to look at what we have at Engineering Supply.