Flex Tools 4 Tool Combo Kit, Hammer Drill Driver w/Turbo Mode, Quick Eject Impact Driver, Circular Saw, and Work Light, Stacked Lithium - FXM403-2G

Show up to the jobsite in full force with four FLEX SENSOR-FREE Brushless motor essentials. This kit combines the powerful cutting capabilities of the FLEX 7-1/4" Circular Saw with the torqued-out FLEX 1/2" 2-Speed Hammer Drill and FLEX 1/4" Hex Impact Driver. Plus, do it all while commanding ultimate jobsite visibility with the FLEX Work Light. Total FLEX 24V cross-compatibility also means these tools share the FLEX Stacked Lithium Advantage of unmatched 24V battery power, runtime, and charging capability. Kit includes all four tools, two 24V batteries, and charger. Protected by the FLEX Limited Lifetime Warranty when registered within 30 days of purchase at registermyFLEX.com through December 31, 2025.

• 200% more power with 24V lithium, 300% longer battery life with THERMA-TECH™+ heat management, 100% faster charging; 100% cross-compatible with all FLEX 24V tools and chargers.
• Every FLEX 24V tool is built around an intelligent digital brushless motor designed to eliminate friction and optimized for higher efficiency and power.
• 4 Tools, 2 Batteries, 1 Charger
• 1,400 in-lbs of torque - 2,500 RPM - 40,000 IPM
• 2,500 in-lbs of torque - 4,000 RPM - Quick Eject Collet - Multi-Mode Control
• Powerful 2-9/16" Depth of Cut - 5,800 RPM
• 300 lumens for high illumination
• Compatible with all FLEX 24V batteries, chargers and tools.

• 1/2" 2-Speed Hammer Drill with Turbo: No-Load Speed: 0-550/0-2,000 RPM
• TURBO Speed: 0-700/0-2,500 RPM
• Impact Rate: 0-8,800/0-32,000 IPM
• TURBO Impact Rate: 0-11,200/0-40,000 IPM
• Max. Torque: 1,400 in-lbs, 158 Nm
• Clutch Settings 24+D+H
• Chuck Capacity: 1/2 in, 1/2 po, 1/2 pu
• Chuck Type: Metal single-sleeve keyless ratchet with carbide teeth
• Tool Length: 7.2 in, 182 mm
• Tool Weight (without battery): 3.8 lbs, 1.7 kg
• 1/4" Quick Eject Hex Impact Driver with Multi-Mode: No-Load Speed: 0-550/0-2,000 RPM
• Impact Rate: 0-4,450 IPM
• Max. Torque: 2,500 in-lbs, 282 Nm
• Collet: Quick Eject 1/4 in Hex
• Tool Length: 4.7 in, 119 mm
• Tool Weight (without battery): 2.7 lbs, 1.2 kg
• 7-1/4" Circular Saw: Saw Blade: 7-1/4 in, 184 mm
• No-Load Speed: 5,800 RPM
• Bevel Capacity: 0-56°
• Arbor: 5/8 in, 16 mm
• Cut Capacity at 90°: 2-5/8 in, 66 mm
• Cut Capacity at 45°: 1-7/8 in, 48 mm
• Tool Weight (without battery): 9lbs, 4kg
• Accessories Included: 7-1/4" FLEX Blade, Vacuum Adaptor & Lower Guard Lever, Blade Wrench
• Work Light: Max. Lumens: 300Im
• Rotation: 104°
• Runtime: Up to 11 hours on a high mode 2.5Ah Battery

• 1/2" 2-Speed Hammer Drill Driver with Turbo Mode
• 1/4" Quick Eject Hex Impact Driver with Multi-Mode
• 7-1/4" Circular Saw
• Work Light
• 3.5Ah Stacked-Lithium Battery
• 6.0Ah Stacked-Lithium Battery
• 280W Rapid Charger
• FLEX Bag
• Attachments: Side Handle
• (2) Bit Holder
• (3) Belt Clip
• Vacuum Adaptor & Lower Guard Lever
• Blade Wrench
• Accessories: #2 Philips Bit
• T25 Bit
• 7-1/4" 24T FLEX Blade

Click Here for Operator's Manual