GPS and GNSS Equipment, GPS Accessories, GPS Tripods, GPS Bags - EngineerSupply

800.591.8907 M-F 8-5PM EST

21 Years Serving Customers Like You. Buy With Confidence.

Offering the best GPS survey equipment on the market.

GPS Equipment

Engineer Supply sells a variety of GPS survey equipment and accessories, which can include GPS pole transporters when you need to move your GPS poles from one job site to another without having to reset your equipment. We also have a variety of GPS for equipment and other related accessories (such as bags and cases) that can make any surveying job easier. Feel free to look at what we have in stock, so you can browse through some of the best GPS survey equipment on the market.

Free Shipping
Ships By Truck
Volume Discounts
Call For Lower Price

GPS Equipment Features

Read our Helpful Article: List of Land Surveyors Tools

Variety of products

Numerous accessories

Perfect for surveying

Proven brands

Durable design

Related Categories

Helpful Videos

Watch and Learn with our product videos

HOW TO SET UP A GPS TRIPOD PROPERLY


You should start with the tripod in a horizontal position. You hand-hold it, or you can place it on the ground. Extend the center pole to your desired height, and raise the tripod horizontally while turning it vertically. Set the ground point down, and extend the legs while kicking them into the ground. Secure one leg at a time to the angle you want. And from there, you can easily pivot the tripod until the bubble is as close to the center as possible. Adjust one leg at a time to level the tripod. And from there, you can install the antenna.


SECO RECEIVER WITH GPS POLE TRANSPORTER


You shouldn't drive on public roads with the receiver and transporter installed, because you want to keep safety in mind. You want to insert the hitch into the receiver by sliding the pin into one of the two holes, but the crossbar needs to be as close to the bumper as possible. Rotate the bumper grip so the hook can engage the inside lip, and tighten the knob so the hook is snug. Attach the pole transporter by using the two quick-release pins, and use the two bolts to attach the crossbar


Featured Articles

Read our Helpful Articles


QUALITY GPS SURVEY EQUIPMENT FROM PROVEN MANUFACTURERS

If you’re looking for some of the best GPS survey equipment on the market, you can find what you need at Engineer Supply. We know that surveyors need to have the right tools, which is why we’re proud to carry some the best manufacturers in the industry. Whether you need a GPS tripod or some other type of GPS survey tool, you can be sure to find what you need in our store. Feel free to look at what we have in stock, so you can find the right GPS for equipment that will meet your specific needs.


A VARIETY OF GPS SURVEY TOOLS TO MEET A VARIETY OF NEEDS

No matter what type of GPS for equipment you’re looking for, you can find what you need at Engineer Supply. We have a broad selection from some of the most established brands on the market, which is why we’re one of the best places to buy GPS survey equipment online. Feel free to look at what we have in our store, so you can browse through the best GPS survey equipment you can find anywhere.


Frequently Asked Questions

What is GPS survey equipment?

GPS stands for “Global Positioning System,” and it uses signals coming from satellites to pinpoint a specific location. It can also provide data about the speed and time synchronization for different forms of travel. This can be an advantage for land surveyors, because it allows them to get what they need almost instantaneously. As long as the instrument has a clear view of the sky to receive the signals coming from satellites, GPS land surveying can give you the highest degree of accuracy and can be much faster than more traditional surveying methods.

How does GPS survey equipment work?

Every piece of GPS for equipment is used for different purposes, but there are three methods of GPS measurement:
  • Static GPS Baseline— This method is used to find the coordinates for specific survey points by recording GPS observations over both known and unknown locations for at least 20 minutes. Then, the data is processed so the coordinates can be determined within a 5mm accuracy.
  • Real-Time Kinematic (RTK) Observations— One receiver stays open over a known point (called the “base station”), while another receiver moves between different positions (called the “rover station”). By using a radio link, the position of the rover station can be calculated in a few seconds. And as long as it’s within 10km of the base station, it can give you a level of accuracy that’s similar to the baseline method.
  • Continuously Operating Reference Stations (CORS)— A survey grade GPS receiver is installed at a specific location as a starting point for GPS measurements in that area. GPS survey equipment can then be used to collect data while combining it with the CORS data to accurately calculate different positions.
Be sure to look at what we have at Engineer Supply, so you can browse through the best GPS survey equipment on the market.

How do I use GPS survey equipment?

Certain instruments are needed for GPS land surveying, which can include but may not be limited to:
  • GPS Receivers— These devices are needed to receive signals from GPS satellites, so you can make the calculations you need. They also come with a variety of optional features (such as multiple band channels, built-in Bluetooth, Wi-Fi technology, and OLED displays).
  • GPS Rover Rods— These instruments can be used to extend the rover’s range. They can be made from a number of durable materials and can come in different lengths.
  • GPS Poles— They’re used to mount GPS survey equipment. They’re lightweight, durable, and can come in different lengths.
  • GPS Bipods/Tripods— Different GPS equipment can be mounted on them, so more stability can be achieved. They can also be adjusted to different lengths.
  • GPS Antennae— They make it possible for GPS systems to receive signals from satellites. Many devices come with internal antennae, but you can use these devices to get more signal strength.
  • Total Stations— They combine the functions of an electronic theodolite with an electronic distance meter (EDM) device, and they come with software that you can run on your computer. Total stations can be used to determine the coordinates of different survey points by measuring angles and distances, but they can also use GPS technology to get more precise results.
The cost of GPS for equipment can vary. But if you want to get the best value for your money, be sure to look at what we have in stock.

Can I rent GPS survey equipment?

There are places where you can rent GPS equipment you can use for surveying. And in some cases, this option may be more economical. You may only need it for a specific project, or you may want to try out the equipment before you decide to buy it.

Where can I buy the best GPS survey equipment?

If you’re looking for GPS survey equipment that you can use on your next project, Engineer Supply has tools from some of the best manufacturers on the market. We offer a variety of GPS and GNSS devices, which include but may not be limited to:
  • GPS pole transporters.
  • GNSS rods.
  • GPS tripods.
  • GPS bipods.
  • GPS prism poles.
  • GPS rover rods.
We also carry a variety of GPS-related accessories (such as bags and cases). Feel free to look at what we have in stock, so you can find a product that will meet your specific needs.

Customer Reviews

  • 4 Stars
    Site is slow to respond
  • 4 Stars
    Easy
  • 5 Stars
    Easy to order online
Please Wait... processing