Presco Texas Solid Color Roll Flagging (Single Roll - 16 Colors Available)

Well-known in the industry as "Texas Flagging", this Roll Flagging is colorful and highly visible. Also called Fluorescent Tape, or Marking Tape by some. Presco solid-color roll surveyors flagging is the most durable, longest-lasting outdoor roll flagging available anywhere thanks to proprietary formulations and annealing. Don't waste your money on cheap roll flagging that stretches, fades, and cracks. Presco Flagging has added plasticizers that yield maximum physical properties increasing tensile strength. Presco Roll Flagging is the most asked for flagging by industry professionals in land surveying, construction, forestry, logging, mining, geophysics, utilities, and oil exploration. This is the industry standard when it comes to roll flagging.

• TXBK: Texas Black
• TXB: Texas Blue
• TXBG: Texas Blue Glo
• TXG: Texas Green
• TXGG: Texas Green Glo
• TXLG: Texas Lime Glo
• TXO: Texas Orange
• TXOG: Texas Orange Glo
• TXP: Texas Pink
• TXPG: Texas Pink Glo
• TXPP: Texas Purple
• TXR: Texas Red
• TXRG: Texas Red Glo
• TXW: Texas White
• TXY: Texas Yellow
• TXYG: Texas Yellow Glo

• Non-Toxic
• Non-flammable
• All APWA colors provided
• Texas-shaped embossing, superior weathering

• Material thickness of standard color rolls: 2.0 Mil
• Material thickness of PresGlo color rolls: 3.0 Mil
• Temperature Resistance: -20°F
• Dimensions: Flagging is 1-3/16" Wide
• Standard Colors each roll is 300 Feet long.
• PresGlo Colors each roll is 150 Feet Long.
• Quantity: 1 roll
• For a dozen rolls see bundle here

Please note: This product is considered a consumable product and cannot be returned once it has been delivered.

Wrap wood stakes by using both hands wrapping in opposite directions, while stretching and over-lapping the flagging all at the same time. After tying a secure knot, some length is left over on the ends to make the flagged stake visible. The method makes for a very tight and durable flagged stake. The over-lapping and stretching avoid the flagging from loosening later and sliding down the stake. If done properly the flagging will be so tight it would need to be cut off of the stake using a knife or cutter of some type.