HeatStar PRO-SERIES HSP200ID: Indirect Fired Construction Heater - F105115

HeatStar PRO-SERIES 180,000 BTU/HR Indirect Fired Heater. The HSP200ID is an ideal heating soloution when paired with 50' of 14" duct and a remote thermostat. This indirect fired heater is an ideal solution for delivering even heat to both event tents and construction sites with clean fresh heated air. You can place the heater outside the space and duct the warm air in or for a fuel savings you can place the heater in the space to be heated and vent the exhaust out. Either way it is hard to beat the comfort and safety of indirect heat.

• Heat exchanger to keep exhaust gas and heated air separate
• 17 gallon tank capacity
• Powerful fans ensure high static pressure
• Long life stainless steel combustion chamber
• Electronic flame control
• Water resistant flame control box
• Automatic safety and control devices
• Optional thermostat available for constant temperature control
• Durable powder coated finish
• Heavy duty duct adapter available
• UL Certified

• Weight: 185
• Fuel-type: Kerosene, Diesel 1# or 2#, Fuel Oil, Jet A fuel
• Tank-capacity-gal: 17
• Ignition: Continuous
• Electrical-rating: 120v, 60 HZ, 13 Amp
• Air-volume-cfm: 1060
• Heated-fuel-filter: Standard
• Heated-nozzle: No
• Clearance-to-combustibles-h: 6 ft
• Adapter: F105111 Single (14") / F105117 Dual
• Recirculating-ducting: Optional
• Duct-length-max: 50 ft
• Duct-diameter: 14 in
• Multiple-ducting-optional: Optional
• Wheel-type: Solid Rubber
• Thermostat-optional: F105108 Analog (33') / F105106 Digital (33')
• Item-length-in: 52.55
• Item-width-in: 22.63
• Item-height-in: 39.37
• Item-weight-lb: 185
• Warranty: 1 Year Limited
• Model: HSP200ID