Measuring Rod Rulers, Measuring Sticks, Measuring Poles Page 2 - EngineerSupply

800.591.8907 M-F 8-5PM EST

21 Years Serving Customers Like You. Buy With Confidence.

Simple measuring for horizontal and vertical distances

Measuring Rod Rulers

A measuring rod can be used for both horizontal and vertical distances. And because of its telescopic design, you will be able to adjust it according to your needs. If you need to use it to measure elevation or elevation grade, you can attach a laser so you can get more accurate measurements without the need for math.
Free Shipping
Ships By Truck
Volume Discounts
Call For Lower Price

Measuring Rod Rulers Features

Read our Helpful Article: Measuring Rod Rulers Recommendations





Laser Detector

Related Categories

Helpful Videos

Watch and Learn with our product videos

Using a height scale

The height scale on a SECO Leveling Rod is based on a telescopic design, which has several sections that can be raised in a top-down fashion until the desired height is raised. This mechanism is used to measure the vertical distance of a space. You want to raise the top section first. Then, continue to raise subsequent sections until the rod makes contact with the other end. Make sure you keep your hand on the rod as you raise it, because it will keep it in place. Once it has made contact with the other side of the area you want to measure. Look at the ruler to determine the distance between the two points.

Direct Elevation Rod Usage

The SECO Direct Elevation Rod is based on a system that has been around for more than 60 years, which doesn’t involve any math. They’re meant to be used with an optical device, and a laser can be attached so you can get more accurate readings. This type of measuring rod has two locks — one for the tape face and another for extending the rod. Because you can measure the elevation from a direct reading, there’s no need for math. With some simple adjustments, you can measure elevation. And with some simple arithmetic, you can measure the difference in elevation. This tried-and-true method of rod measurement can be used to determine the elevation grades of any area or job site.

Featured Articles

Read our Helpful Articles: Best pipe & Cable Locators


When you’re surveying a job site, you want to have the right tools at your disposal. Rod measurement is an important way to determine vertical distance and elevation grade. You can even use it for horizontal measurements in certain situations. And by attaching a laser detector to the rod, you can use it as a level — especially if you’re measuring the area for a foundation that will be constructed later. A measuring stick is a handy tool that can come in a few different styles. So no matter what type of job you need to survey, this kind of tool should be in your tool box.


Despite its simplicity of design, a measuring rod can be used for determining both distance and elevation grade. With a telescopic design, it can be adjusted to fit any type of height, and its ruler-like measuring system makes it easy to use. While some rods are strictly for measuring height, others can also be used as levelers. Some models can even be used to measure the elevation grade of the ground, which can be helpful in the construction of a property foundation. No matter what type of job site you need to survey, rod measurement is considered to be an important part of the process.

Also known as “measuring poles” or “height sticks,” measuring rod rulers are handy tools that come in a few different styles. Some of them can survey elevation grade by using a dual-purpose feature that’s built into the measuring rod, while others are meant to be used as measuring rulers with no grade or level rod capabilities. A common use for this type of device is to measure bridges and overhead utility lines, so wide load truck haulers can see if their vehicle will be able to pass through.

Some grade or level rods have a measuring stick on the back, which is an added feature that could come in handy (especially if you’re looking for both types of rod measurement). Many times, surveyors can reduce the need for measuring tape if they have one of these measuring rulers with them. Not only can then be used for vertical measurements, but they can also be used horizontally.

Frequently Asked Questions

What is a measuring rod?

A measuring rod can be used to measure the length of survey areas. It’s typically round or sectioned into squares, but you can also find one that looks like a flat board. Feel free to look at what we have at Engineer Supply, so you can find a measuring pole that’s right for you.

How can measuring rods be used?

A measuring stick can be used to measure both horizontal and vertical distances. And because of its telescopic design, you can adjust to whatever length or configuration you need. You can even attach a laser, so you can measure elevation or grade.

Who invented the measuring rod?

The oldest measuring stick came from Ancient Sumer, and it was made of a copper alloy. It was found by a German Assyriologist named Eckhard Unger while he was excavating at Nippur, and it dates back to 2650 B.C. The ruler was divided into Sumerian cubits (which is approximately 20 inches), but there’s some disagreement as to whether this is true.

What are the different types of measuring tools?

There are many types of measuring tools, but here are some that every construction professional needs:
  • Tape Measure— It should have a strong hook that can move. It should also be able to extend and retract with ease. A 25-foot measuring tape is common, but it should have enough length to measure extended spans while not being so long that it’s too heavy.
  • Speed Square— It acts as five tools in one (at least, at a minimum). And the markings will never fade, which will make sure you can measure the correct angles on wood cuts for many years.
  • Protractor— It can tell you which angle to set your miter saw by pressing the legs against two surface and by reading the angle measurement.
  • Mechanical Carpenter’s Pencil— Standard pencils won’t cut it if you’re marking wood, but regular carpenter pencils need constant sharpening. That’s why a mechanical carpenter’s pencil is a great choice.
  • Laser Measure— It has become a standard tool for most designers, architects, and contractors, but it’s also useful for homeowners in case they need to measure distances up to 50 feet.
If you’re looking for a measuring pole or any other measuring tool, be sure to look at what we have at Engineer Supply.

Where can I buy quality measuring rods?

If you’re looking for a measuring stick or any other measuring tool, you can find it at Engineer Supply. We have a broad selection of measuring tools that can be used by any professional surveyor or building contractor, and all of them come from the best manufacturers on the market. Feel free to look at what we have in stock, so you can find a measuring rod that will meet your specific needs.

What is rod measurement?

Sometimes called a “perch” or “pole,” a rod is a type of surveying tool that can be used to measure length. And it will have different graduations, depending on what it’s designed for. The term “rod” also refers to an old English unit of measurement that’s equal to 16.5 feet (5.029 meters), but variations between 9 and 28 feet (2.743 and 8.534 meter) were also used.

Customer Reviews

  • 3 Stars
    Website is clumsy.
  • 5 Stars
  • 5 Stars
    Thank you for having the product I was looking for available.
Please Wait... processing